Background
On 20 December 2016, the European Banking Authority (the
"EBA") published the final version of a
report entitled "EBA Report on Covered Bonds -
Recommendations on Harmonisation of Covered Bond Frameworks in the
EU" (the "Report"). The Report
builds on previous work and provides additional recommendations on
how to further harmonise the national legislative frameworks on the
covered bond instrument.
In response to Recommendations of the European Systemic Risk Board
(ESRB) and following the publication by the EBA of their Report on
EU Covered Bond Framework and Capital Treatment*, the EBA began an
extensive analysis of the regulatory and legal framework for
covered bonds in individual Member States, with a specific focus on
alignment with the EBA's best practices.
More recently, in March 2017 the European Covered Bond Council
(ECBC) announced that it supported the Report's recommendations
and offered its collaboration to implement the harmonisation of
covered bonds across the EU in the most effective way.
The Report
The aim of the Report was to:
- summarise the activity of regulatory investigation which was carried out following publication of the Report on EU Covered Bond Framework and Capital Treatment (July 2014);
- develop four key recommendations (the "Recommendations") to implement a common regulatory framework for covered bonds; and
- set out three key steps for the implementation process of the Recommendations and define the necessary activities for each of them.
The Recommendations issued by the EBA are as follows:
Recommendation n. 1 – Three-step approach to
the harmonisation of the European regulatory framework for covered
bonds.
Recommendation n. 2 – Development of a
covered bonds directive (the "CB
Directive").
Recommendation n. 3 – Amendment of EU
Regulation 575/2013 (the "CRR").
Recommendation n. 4 – Voluntary convergence
of national rules governing covered bonds.
The Report suggests implementation of the above four
Recommendations in three key steps which are summarised below.
STEP I: EU Covered Bonds Directive
The proposed three-step approach builds on the strengths of the
existing national frameworks, but allows better regulation of
covered bonds in order to achieve a broad harmonisation throughout
the EU. The adopted model provides for the development and
implementation of framework legislation ensuring more a consistent
approach, particularly as regards prudential standards, generally
applicable in all Member States, and which replaces the discipline
currently contained in Article 52, paragraph 4, of Directive
2009/65/EU (Undertakings for Collective Investment in Transferable
Securities – UCITS) (the "UCITS
Directive"))** .
In particular, European legislation should define structural
requirements for covered bonds with specific reference to:
- requirements on the dual recourse of a covered bond, segregation of cover assets and bankruptcy remoteness;
- requirements on the coverage principle, liquidity risk mitigation and cover pool derivatives;
- requirements on a system of special public supervision and administration related to covered
- bonds, including requirements for a cover pool monitor, supervision of the issuer on an ongoing basis, supervision in the event of the issuer's insolvency/resolution, and administration of the covered bond programme following the issuer's insolvency/resolution;
- transparency requirements — i.e. scope, format and frequency of disclosure of information; and
- conditions for soft bullets and conditional pass through covered bonds.
- The EBA recommends developing a new covered bonds framework, which primarily deals with providing a single and organic definition of the instrument. The definition, obtained in light of the experience of market players as well as the work of the competent authorities, should:
- define both minimum requirements and characteristics that covered bonds must have in all Member States;
- facilitate the achievement of a good level of harmonisation;
- differentiate covered bonds from other financial instruments with similar characteristics;
- replace and supercede all previous definitions, including for example those contained in the UCITS Directive.
The CB Directive would become the new European regulatory framework, ensuring a uniform development of the same legislation in all Member States, granting each Member State sufficient flexibility to safeguard its specific needs.
STEP II: Amendments to the CRR
The second step of the process provides for amendments to the sections of the CCR dealing with covered bonds. Currently, the CRR deals with the regulation of covered bonds with reference to the following three main aspects:
- Criteria for investors (credit institutions and investment firms) in covered bonds for preferential risk weight treatment of their covered bond investments, being the eligibility requirements for collateral and the disclosure requirements for an issuer (Article 129);
- Risk weight treatment under the standardised approach (Article 129), preferential LGD (loss-given default) treatment of exposures in the form of covered bonds under the (foundation) IRB approach (Article 161(1)(d)), as well as preferential specific risk treatment (Article 336(3)); and
- Criteria for the valuation of immovable property collateralising mortgages in cover pools (Article 208 and Article 229(1) via Article 129(3)).
With reference to the risk weight treatment of covered bonds, the EBA recommends that the CRR is amended to be aligned with the provisions of the newly introduced CB Directive. In particular, with reference to Art. 129 of the CRR:
- eligible assets: the EBA believes that the current level of eligible assets for Cover Bonds should not be extended. Funding for small and medium-sized enterprises (SMEs) and infrastructure financing should not be included among eligible assets; furthermore, they recommend further analysis on ship loans guarantees which are currently included in Art. 129 of the CRR as eligible assets) would be needed. In addition, the EBA recommends not extending the exemption for the inclusion of RMBS and CMBS beyond December 2017;
- limit on substitution assets: the EBA recommends to amend the CRR in order to provide for the rules on composition of both replacement assets and limits within which replacement may be expected (this limit should be set at 15% of the minimum required coverage);
- LTV limits: the EBA considers that the current LTV (loan to value) limits set out in the CRR are appropriate, however, the CRR should specify that they are "soft coverage" LTV limits and should be applied on an ongoing basis throughout the life of the programme;
- overcollateralisation: the EBA suggests setting the minimum effective overcollateralisation at 5%; the percentage limits on exposures as currently set out in Art. 129 of the CRR should continue apply but should not be relevant to the voluntary overcollateralisation; and
- improving the disclosure policy for the issuer, so that the dissemination of transparent information can become a standard requirement for all regulated covered bonds, rather than a specific condition for obtaining a preferential prudential weighting factor.
STEP III: Voluntary convergence
The third and final phase seems to be less binding than the
others; in any case, it will depend on the actions taken by
individual Member States. In this respect, the EBA recommends and
encourages voluntary convergence between national frameworks also
for other aspects (i.e. portfolios of assets constituted by
underlying homogeneous activities or debtors located in
jurisdictions not belonging to the European Economic Area).
Taking a long-term view, the EBA believes that such spontaneous and
non-binding approach to legislative reform could lead to extended
homogeneity across the Member States.
The table below provides a summary of main principles of the
harmonisation programme recommended by the EBA described
above.
STEP I: Development of a covered bond framework (directive |
STEP II: Amendments to the CRR (related to preferential risk weight treatment) |
STEP III: Voluntary convergence |
Establishment of the base-line definition of the covered bond for EU financial regulation Replacement of the covered bond-related provisions in UCITS Directive Focus on structural features Point of reference for prudential regulatory purposes (e.g. BRRD, LCR) Applicable across sectors Requirements in Step I obligatory for all covered bonds seeking regulatory recognition |
Enhanced conditions for preferential risk weight treatment Focus on credit risk related features Requirements in Step I as well as Step II obligatory for all covered bonds seeking preferential risk weight treatment |
Voluntary convergence of national frameworks through non-binding instruments Specific areas with less material impact on the overall robustness of the covered bond frameworks |
Areas covered: 1. Dual recourse, segregation of cover assets and bankruptcy remoteness of the covered bonds 2. Requirements for coverage, liquidity risk mitigation and cover pool derivatives 3. Requirements for the system of special public supervision and administration: (i) Cover pool monitor (ii) Supervision of covered bond issuer (iii) Supervision in the event of issuer's insolvency/resolution (iv) Administration post issuer's insolvency/resolution 4. Transparency requirements 5. Conditions for soft bullet and CPT covered bond structures |
Areas covered: All requirements in STEP 1 + 1. Requirement for eligible cover assets 2. Limits on substitution assets 3. LTV limits for mortgage cover assets 4. Minimum overcollateralisation |
Areas covered: 1. Composition of the cover pools 2. Cover pools with underlying assets/obligors located in jurisdictions outside the EEA 3. LTV measurement and frequency of revaluation 4. Stress testing by the covered bond issuer |
* This consultation also dealt
with the issue related to the development of a harmonised European
framework for covered bonds, admitting that legislative divergences
between countries may pose a major obstacle in terms of liquidity
and investment opportunities and highlighting the importance of
several recommendations on best practices suggested by the
EBA.
** In accordance with paragraph 1, first subparagraph. Member
States may raise the limit of 5% up to a maximum of 25% if the
obligations are issued by credit institutions having their
registered office in a Member State and subject to a special public
supervision for protection of bonds' holders. In particular,
sums deriving from issue of such bonds are invested, conforming to
the law, in assets able to cover receivables linked to the bonds
for the entire duration and that, in case of insolvency of the
issuer, would be used on a priority basis for both repayment of
capital and payment of accrued interest. Where a UCITS invests more
than 5% of its assets in bonds referred to in the first paragraph,
issued by a single issuer, the value of such investments will not
exceed 80% of the value of UCITS' assets. Member States shall
communicate to the Commission the list of bonds categories referred
to in the first subparagraph, as well as the categories of issuers
authorised under the law and supervisory arrangements to issue
obligations complying with criteria set out in the Report. These
lists shall be accompanied by a description of the offered
guarantees. The Commission shall immediately submit this
information to the other Member States, along with appropriate
comments, and make it accessible to the public. Such information
may be exchanged with the European Securities Committee referred to
in Article 112 (1).
The content of this article is intended to provide a general guide to the subject matter. Specialist advice should be sought about your specific circumstances.