United States: ITC Beginning Of Construction Guidance

On June 22, 2018, the US Internal Revenue Service ("IRS") released Notice 2018-59 ("Guidance"). The Guidance provides rules to determine when construction begins with respect to investment tax credit ("ITC") eligible property, such as solar projects. The Guidance was much awaited by the solar industry because the date upon which construction begins governs the determination of the percentage level of the ITC, which is ratcheted down for projects that begin construction after 2019.

In addition to applying to solar (and fiber-optic solar), the Guidance applies to the following energy generation technologies: geothermal, fuel cell, microturbine, combined heat and power, and small wind.

Overview of Beginning of Construction

The ITC percentage for a solar project is determined based on the year in which construction of the project begins, provided the solar project is also placed in service before January 1, 2024, as follows: (i) before January 1, 2020, 30%; (ii) in 2020, 26%; (iii) in 2021, 22%; and (iv) any time thereafter (regardless of the year in which the solar project is placed in service), 10%.

The Guidance is quite similar to existing guidance for utility-scale wind projects.1 As expected and consistent with the wind guidance, the Guidance provides two means for establishing the beginning of construction of a solar project (and other ITC technology projects): (i) engaging in significant physical work either directly or by contract (the "Physical Work Method") or (ii) paying or incurring

(depending on the taxpayer's method of accounting) 5% of the ultimate tax basis of the project (the "Five Percent Method").2 As is the case with wind, the Guidance provides that the IRS will apply strict scrutiny of the facts and circumstances to determine if the project was continuously constructed from the deemed beginning of construction date through the date the project is placed in service.3

Four-Year Placed-in-Service Window

The wind guidance provides a four-year window for the project to be completed and to avoid the scrutiny as to whether the construction was continuous. There had been speculation that the window for solar (or at least some classes of solar) would be shorter because the time to construct solar projects (especially rooftop solar) is generally shorter than the time to construct a wind project. In what is a relief to the solar industry, the Guidance provides solar and the other ITC technologies a four-year window as well.

What the four-year window means in conjunction with the ITC ratcheting down is that a taxpayer (e.g., a distributed generation solar developer) could purchase $5 million of racking that is paid for on December 31, 2019, and delivered to the taxpayer on April 15, 2020.4 The taxpayer could then use the $5 million of racking in the construction of $100 million5 of projects6 (assuming the 5/100 ratio is maintained in each project), none of which reach "notice to proceed" until 2023 so long as the projects are placed in service by the end of 2023. That $100 million of projects would qualify for the 30% ITC.7

Detailed Discussion of the Physical Work Method

As discussed above, the Guidance provides two methods for establishing the beginning of construction. Under the Physical Work Method, a taxpayer can establish that construction has begun by starting physical work of a significant nature.

The Physical Work Method focuses on the nature of the work performed, not the amount or cost. The work must be performed with respect to property integral to the production of electricity (in contrast to the transmission of it). Items that are not integral include fencing, most buildings, and roads that are not used to transport equipment that is used to operate and maintain the energy property.8

The Guidance provides that the Physical Work Method can be satisfied by the manufacture off-site of components, mounting equipment, support structures such as racks and rails, inverters, step-up transformers9 and other power conditioning equipment.10 In terms of qualifying on-site work, the guidance provides a "non-exclusive list" that for solar includes the "installation of racks or other structures to affix photovoltaic panels, collectors or solar cells to a site."

There are two important caveats with respect to satisfaction of the Physical Work Method. First, the manufacture of items that are either in "inventory or are normally held in inventory by a vendor" does not satisfy the requirement. For instance, the manufacture of fasteners would not qualify as fasteners are normally held in inventory by vendors. Likewise, the manufacture of most solar panels would appear to not qualify. In contrast, manufacture of a custom step-up transformer does qualify because vendors do not hold custom step-up transformers in inventory.

The second caveat is that the work not directly performed by the taxpayer must be performed pursuant to a "binding written contract" that is executed prior to the work being started.11 As related parties in many instances are separate taxpayers (e.g., a corporate parent and its wholly owned

corporate subsidiary), project owners need to ensure that work done by a related party that is a separate taxpayer is performed under a binding written contract between the project owner and its affiliate.

To be treated as binding, the contract has to be binding under state law (e.g., not an option agreement) and damages cannot be capped at less than 5% of the contract value. That does not mean the project owner must always pay at least 5% of the contract value. For instance, if the contractor's actual damages were only 1% of the contract value, it would be sufficient, in the case of a breach, that the project owner would owe the actual damages (i.e., 1%). That is, the words "five percent" do not have to be included at all in the contract so long as the contract does not have any cap on the damages the project owner would owe the contractor for a breach.

Detailed Discussion of the Five Percent Method

Under the Five Percent Method, a taxpayer can establish that construction has begun by paying or incurring at least 5% of the total cost of the project. Whether an amount is treated as paid or incurred is determined under the Internal Revenue Code. Only costs included in the depreciable basis of the project are taken into account to determine whether the Five Percent Method is satisfied, and, like the Physical Work Method, only costs incurred with respect to property integral to the production of electricity are considered. Unlike the Physical Work Method, costs paid or incurred with respect to property that is inventory or normally held in inventory by a vendor, such as solar panels, would count toward satisfaction of the Five Percent Method.

The Guidance includes a favorable modification of the cost overrun rules as applied to solar projects and other ITC technologies. For wind, if there is a cost overrun such that the amount incurred toward satisfaction of the Five Percent Method with respect to a project comprising multiple turbines is less than 5%, but at least 3%, of the actual project spend, the taxpayer can opt to not claim tax credits with respect to some of the turbines of the project until the remaining turbines for which the tax credits are claimed have a "total cost" that is not more than 20 times the amount incurred toward satisfaction of the Five Percent Method.12 Under the Guidance for the ITC technologies, this reduction technique is likewise available to the extent the project can be segregated into "energy properties," and then some of those energy properties are excluded from the tax credits until the remaining "energy properties" for which the tax credits are claimed satisfy the Five Percent Method. However, there is no requirement that the costs incurred with respect to the project be equal to at least 3% of the total project spend. An "energy property" includes all components that must be placed in service at the same time in order to generate electricity.

For rooftop solar, all components "installed on a single rooftop" constitute a single energy property. This means for rooftop projects, developers need to be careful to not have the ultimate tax basis of the ITC eligible property exceed 20 times what was spent under the Five Percent Method as such an excess disqualifies all of the project from relying on the Five Percent Method. The Guidance notes that if the Five Percent Method is not available, the taxpayer could use the Physical Work Method if the facts support it.

Single Project

Multiple energy properties that are operated as part of a single project are treated as a single energy property for purposes of determining the beginning of construction. So, if construction begins on one PV system in 2019 (e.g., physical work is performed, or costs are incurred, with respect to a PV system), all PV systems that are operated together with that PV system will have a 2019 beginning of construction date.

Whether multiple energy properties are operated as a single project is a factual determination that is made as of the date the project is placed in service.

The nonexclusive factors in the Guidance that multiple energy properties are operated as part of a single project are: (i) the energy properties are owned by a single legal entity; (ii) the energy properties are constructed on contiguous pieces of land; (iii) the energy properties are described in a common power purchase agreement or agreements; (iv) the energy properties have a common intertie; (v) the energy properties share a common substation; (vi) the energy properties are described in one or more common environmental or other regulatory permits; (vii) the energy properties were constructed pursuant to a single master construction contract; or (viii) the construction of the energy properties was financed pursuant to the same loan agreement.

Multiple energy properties that are operated as a single project may be disaggregated and treated as multiple separate energy properties for purposes of determining whether a separate energy property satisfies the continuity requirements discussed above. As noted above for rooftop solar, all components "installed on a single rooftop" constitute a single energy property, so the continuity requirements must be satisfied with respect to the entire project.


The Guidance contains the same transfer rules that apply to utility-scale wind projects. These rules are premised on the fact that there is no statutory requirement that the taxpayer that starts the construction of the project be the taxpayer that places it in service. However, the IRS has a policy to discourage "trafficking" in equipment that qualifies a project under the Physical Work Method or the Five Percent Method, although such a policy is not reflected in the statutory language. Under these rules, a transfer of a "project" from one taxpayer to another does not cause a loss of begun construction status so long as either (i) the transferred assets are more than equipment and contracts to acquire equipment (e.g., the transferred assets include a power contract and land rights) or (ii) the transferor before or after the transfer is more than 20% related to the transferee.

In a partnership context, this second prong can be satisfied with either a "profits" interest (i.e., a partner's share of the profits (which may or may not be matched by current cash distributions) and losses or a "capital" interest (i.e., what a partner is entitled to in a liquidation)). So, for instance, a transferor that receives a 20.1% capital interest and a 1% profits interest in the transferee would satisfy this requirement.


Overall, the Guidance is favorable and will allow the solar and other ITC industries to plan for project deployments through 2023. Nonetheless, the technical ambiguities and opportunities for foot faults in the Guidance necessitate technical sophistication in applying it.


1 The utility-scale wind guidance is discussed in our 2016 Legal Update.

2 While either method is sufficient by itself, the wind industry tends to prefer the Five Percent Method because of its more objective nature. In addition, if the four-year placed-in-service window is not satisfied, the Five Percent Method provides more

flexibility with respect to satisfying the "continuously constructed" requirement, which is discussed below.

3 The "continuously constructed" requirement is not provided for in the statutory language; however, neither does the statute define when construction on a project begins. Effectively, the IRS's policy is to provide taxpayers with a definition of "beginning of construction" that they can be more certain they have satisfied (i.e., a safe harbor) than trying to satisfy the commonly understood meaning of construction, but, similarly, the IRS uses its discretion to impose a requirement not in the statutory language that taxpayers must "continuously construct" or complete the project within the four-year window.

4 For arrangements that do not involve vendor financing, accrual method taxpayers can pay in one taxable year and receive delivery of the equipment three and a half months after payment and be deemed to have incurred the cost in the year of payment. Taxpayers need to take care that they are consistent with their existing method of accounting as to whether transfer of legal title, physical delivery or both are required to meet the requirement of delivery within three and a half months.

5 The $100 million does not necessarily refer to the out-of-pocket construction costs. Rather, it refers to the "total cost" of the ITC eligible property (i.e., the amount on which ITC is claimed). For instance, the out-of-pocket construction costs may be $90 million, but if the projects are subject to fair market value sales of $100 million, then to meet the safe harbor the 5% is measured against the $100 million (not $90 million). The "total cost" does not include the cost of land because land is not "integral."

6 There is not a specific requirement that the racking, in this example, be intended for specific projects (e.g., the rooftop project on the warehouse at 123 Main Street); rather, the Guidance provides that the taxpayer "may begin construction of an energy property with the intent to develop the energy project at a certain site and thereafter transfer components of property of the energy property to a different site."

7 The Guidance has an effective date of "after December 31, 2018," but illustrates the four-year window with an example of a project that begins construction in 2018. See § 3.02 of the Guidance. The example concludes that the four-year window for such a project would be applied beginning in 2018. Thus, there is some ambiguity as to when the clock would start ticking for a project that begins construction in 2018.

8 The Guidance provides no instruction as to the minimum amount of road used for operation and maintenance activities that must be built to constitute beginning construction; presumably, anything more than a de minimis amount should be sufficient; nonetheless, project developers would be well- served to build as much as they feasibly can given cost and engineering constraints. Further, it has been an open question for years as to whether a road that was initially built for the transport of equipment that subsequently was only used to perform maintenance on a project every two years (i.e., the equipment is not used to "operate" the project) qualifies as "integral" for purposes of this rules. Fortunately, this has proven to be an academic question as most project roads are used to transport equipment that is involved in both operations and maintenance.

9 There is some ambiguity as to whether the manufacture of a transformer that steps up the voltage to 69 kilovolts or more (as opposed to less than such amount) would satisfy the Physical Work Method. Cf. §§ 4.02(1) & 7.02(1) of theGuidance.

10 It would appear that the IRS omitted storage from the list because it is the IRS's view that storage is only "energy property" (i.e., ITC eligible) if it is charged for its first five years of operations at least 75% a year by solar or another technology that qualifies for ITC (including a wind project that has elected the ITC in lieu of the production tax credit). See P.L.R. 201444025 (Oct. 31. 2014), which is discussed in our 2017 blog post. At the time of starting construction, a taxpayer would not be certain that the storage would be so charged, so the IRS may have determined it appropriate to not include it in equipmentthat the manufacture of constitutes the start of construction.

11 There is some language that may suggest that the binding written contract must be executed prior to payment for the work as well (not just the performance). To avoid ambiguity, developers should consider entering into a binding written contract for physical work before either payment or workstarts.

12 See Notice 2014-46, § 5.01.

Visit us at mayerbrown.com

Mayer Brown is a global legal services provider comprising legal practices that are separate entities (the "Mayer Brown Practices"). The Mayer Brown Practices are: Mayer Brown LLP and Mayer Brown Europe – Brussels LLP, both limited liability partnerships established in Illinois USA; Mayer Brown International LLP, a limited liability partnership incorporated in England and Wales (authorized and regulated by the Solicitors Regulation Authority and registered in England and Wales number OC 303359); Mayer Brown, a SELAS established in France; Mayer Brown JSM, a Hong Kong partnership and its associated entities in Asia; and Tauil & Chequer Advogados, a Brazilian law partnership with which Mayer Brown is associated. "Mayer Brown" and the Mayer Brown logo are the trademarks of the Mayer Brown Practices in their respective jurisdictions.

© Copyright 2018. The Mayer Brown Practices. All rights reserved.

This Mayer Brown article provides information and comments on legal issues and developments of interest. The foregoing is not a comprehensive treatment of the subject matter covered and is not intended to provide legal advice. Readers should seek specific legal advice before taking any action with respect to the matters discussed herein.

To print this article, all you need is to be registered on Mondaq.com.

Click to Login as an existing user or Register so you can print this article.

Similar Articles
Relevancy Powered by MondaqAI
In association with
Related Topics
Similar Articles
Relevancy Powered by MondaqAI
Related Articles
Related Video
Up-coming Events Search
Font Size:
Mondaq on Twitter
Mondaq Free Registration
Gain access to Mondaq global archive of over 375,000 articles covering 200 countries with a personalised News Alert and automatic login on this device.
Mondaq News Alert (some suggested topics and region)
Select Topics
Registration (please scroll down to set your data preferences)

Mondaq Ltd requires you to register and provide information that personally identifies you, including your content preferences, for three primary purposes (full details of Mondaq’s use of your personal data can be found in our Privacy and Cookies Notice):

  • To allow you to personalize the Mondaq websites you are visiting to show content ("Content") relevant to your interests.
  • To enable features such as password reminder, news alerts, email a colleague, and linking from Mondaq (and its affiliate sites) to your website.
  • To produce demographic feedback for our content providers ("Contributors") who contribute Content for free for your use.

Mondaq hopes that our registered users will support us in maintaining our free to view business model by consenting to our use of your personal data as described below.

Mondaq has a "free to view" business model. Our services are paid for by Contributors in exchange for Mondaq providing them with access to information about who accesses their content. Once personal data is transferred to our Contributors they become a data controller of this personal data. They use it to measure the response that their articles are receiving, as a form of market research. They may also use it to provide Mondaq users with information about their products and services.

Details of each Contributor to which your personal data will be transferred is clearly stated within the Content that you access. For full details of how this Contributor will use your personal data, you should review the Contributor’s own Privacy Notice.

Please indicate your preference below:

Yes, I am happy to support Mondaq in maintaining its free to view business model by agreeing to allow Mondaq to share my personal data with Contributors whose Content I access
No, I do not want Mondaq to share my personal data with Contributors

Also please let us know whether you are happy to receive communications promoting products and services offered by Mondaq:

Yes, I am happy to received promotional communications from Mondaq
No, please do not send me promotional communications from Mondaq
Terms & Conditions

Mondaq.com (the Website) is owned and managed by Mondaq Ltd (Mondaq). Mondaq grants you a non-exclusive, revocable licence to access the Website and associated services, such as the Mondaq News Alerts (Services), subject to and in consideration of your compliance with the following terms and conditions of use (Terms). Your use of the Website and/or Services constitutes your agreement to the Terms. Mondaq may terminate your use of the Website and Services if you are in breach of these Terms or if Mondaq decides to terminate the licence granted hereunder for any reason whatsoever.

Use of www.mondaq.com

To Use Mondaq.com you must be: eighteen (18) years old or over; legally capable of entering into binding contracts; and not in any way prohibited by the applicable law to enter into these Terms in the jurisdiction which you are currently located.

You may use the Website as an unregistered user, however, you are required to register as a user if you wish to read the full text of the Content or to receive the Services.

You may not modify, publish, transmit, transfer or sell, reproduce, create derivative works from, distribute, perform, link, display, or in any way exploit any of the Content, in whole or in part, except as expressly permitted in these Terms or with the prior written consent of Mondaq. You may not use electronic or other means to extract details or information from the Content. Nor shall you extract information about users or Contributors in order to offer them any services or products.

In your use of the Website and/or Services you shall: comply with all applicable laws, regulations, directives and legislations which apply to your Use of the Website and/or Services in whatever country you are physically located including without limitation any and all consumer law, export control laws and regulations; provide to us true, correct and accurate information and promptly inform us in the event that any information that you have provided to us changes or becomes inaccurate; notify Mondaq immediately of any circumstances where you have reason to believe that any Intellectual Property Rights or any other rights of any third party may have been infringed; co-operate with reasonable security or other checks or requests for information made by Mondaq from time to time; and at all times be fully liable for the breach of any of these Terms by a third party using your login details to access the Website and/or Services

however, you shall not: do anything likely to impair, interfere with or damage or cause harm or distress to any persons, or the network; do anything that will infringe any Intellectual Property Rights or other rights of Mondaq or any third party; or use the Website, Services and/or Content otherwise than in accordance with these Terms; use any trade marks or service marks of Mondaq or the Contributors, or do anything which may be seen to take unfair advantage of the reputation and goodwill of Mondaq or the Contributors, or the Website, Services and/or Content.

Mondaq reserves the right, in its sole discretion, to take any action that it deems necessary and appropriate in the event it considers that there is a breach or threatened breach of the Terms.

Mondaq’s Rights and Obligations

Unless otherwise expressly set out to the contrary, nothing in these Terms shall serve to transfer from Mondaq to you, any Intellectual Property Rights owned by and/or licensed to Mondaq and all rights, title and interest in and to such Intellectual Property Rights will remain exclusively with Mondaq and/or its licensors.

Mondaq shall use its reasonable endeavours to make the Website and Services available to you at all times, but we cannot guarantee an uninterrupted and fault free service.

Mondaq reserves the right to make changes to the services and/or the Website or part thereof, from time to time, and we may add, remove, modify and/or vary any elements of features and functionalities of the Website or the services.

Mondaq also reserves the right from time to time to monitor your Use of the Website and/or services.


The Content is general information only. It is not intended to constitute legal advice or seek to be the complete and comprehensive statement of the law, nor is it intended to address your specific requirements or provide advice on which reliance should be placed. Mondaq and/or its Contributors and other suppliers make no representations about the suitability of the information contained in the Content for any purpose. All Content provided "as is" without warranty of any kind. Mondaq and/or its Contributors and other suppliers hereby exclude and disclaim all representations, warranties or guarantees with regard to the Content, including all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement. To the maximum extent permitted by law, Mondaq expressly excludes all representations, warranties, obligations, and liabilities arising out of or in connection with all Content. In no event shall Mondaq and/or its respective suppliers be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract, negligence or other tortious action, arising out of or in connection with the use of the Content or performance of Mondaq’s Services.


Mondaq may alter or amend these Terms by amending them on the Website. By continuing to Use the Services and/or the Website after such amendment, you will be deemed to have accepted any amendment to these Terms.

These Terms shall be governed by and construed in accordance with the laws of England and Wales and you irrevocably submit to the exclusive jurisdiction of the courts of England and Wales to settle any dispute which may arise out of or in connection with these Terms. If you live outside the United Kingdom, English law shall apply only to the extent that English law shall not deprive you of any legal protection accorded in accordance with the law of the place where you are habitually resident ("Local Law"). In the event English law deprives you of any legal protection which is accorded to you under Local Law, then these terms shall be governed by Local Law and any dispute or claim arising out of or in connection with these Terms shall be subject to the non-exclusive jurisdiction of the courts where you are habitually resident.

You may print and keep a copy of these Terms, which form the entire agreement between you and Mondaq and supersede any other communications or advertising in respect of the Service and/or the Website.

No delay in exercising or non-exercise by you and/or Mondaq of any of its rights under or in connection with these Terms shall operate as a waiver or release of each of your or Mondaq’s right. Rather, any such waiver or release must be specifically granted in writing signed by the party granting it.

If any part of these Terms is held unenforceable, that part shall be enforced to the maximum extent permissible so as to give effect to the intent of the parties, and the Terms shall continue in full force and effect.

Mondaq shall not incur any liability to you on account of any loss or damage resulting from any delay or failure to perform all or any part of these Terms if such delay or failure is caused, in whole or in part, by events, occurrences, or causes beyond the control of Mondaq. Such events, occurrences or causes will include, without limitation, acts of God, strikes, lockouts, server and network failure, riots, acts of war, earthquakes, fire and explosions.

By clicking Register you state you have read and agree to our Terms and Conditions